[ 1.02.16 ]

	- added the 'Cancel Only' mode that cancel button on LED is only activated when error occurs
	- added the function that prints a test page by LED button with KO ribbon
	- modified the function that doing alignment onetime while MS encoding when Hopper Align is set to 'USE'



[ 1.02.12 ]

	- fixed the bug that the temperature of TPH is not able to be adjusted in rewritable mode.


[ 1.02.09 ]

	- added the function to re-search the color value for recovering an error while searching a color panel.
	- added the Ribbon Calibration Mode
	- added the Calibration Command
	- added the function to show the IP and other values of Network Module and Wifi module on the LCD display
	- added the function to consider an error when MAG Start,End Code exist but length of Data is 0. 
	- modified magnetic LOCO CURRENT value from 150 to 200
	- modified the time (10 seconds) to insert the cleaning card on cleaning mode with SMART-31
	- modified the function to sensing a color and level. 
	- modified the logic of countdown the balance that calculated value is used when the balance is over 200 with K ribbon.
        - modified the logic of countdown the balance that balance is decreased all the time after printing when the balance is under 200 with K ribbon.
	- fixed the bug that balance of K Ribbon is not decreased and rolling a ribbon after printing.



[ 1.01.13 ]

	- added the Anti-Static Mode
	- modified the LED to be off when soft-power off on SMART-31
	- modified the moving mode to FULL-STEP when a card is moved
	- supported the function of Cleaning roller on SMART-31
	- fixed the bug of magnetic encoding with Upper JIS mode 
	- fixed the bug that location of Track1, Track3 isn't changed with Upper MS mode
	- fixed the bug the next card is inserted after magnetic read/write action
	- fixed the bug not to show the IP address after loading a NetworkModule IP on LCD panel
	- fixed the bug that replaced ribbon isn't recognized when PC WITNESS, ROOT/USER LOCK is activated



[ 1.01.08 ]

	- adjusted the range of detecting a color of Ribbon
	- modified the start position of panel on 1/3YMCKO ribbon
	- fixed the logo image when a Aribic language in the LCD panel



[ 1.01.01 ]

	- supported 300x600, 300x1200 dpi Mode
	- supported 1/3YMCKO ribbon
	- added the Hopper Align Mode for sigle Card Feeder (SMART-51 Only)
	- added the function that prints a test page by LED button with YMCKO and K ribbon
	- added the Arabic language in the LCD panel
	- adjusted the range of detecting a color of Ribbon
	- modified the function to work the printer even if the balance is 0 with K ribbon
	- modified the function to detach the K ribbon from a card on the backside printing easier with YMCKOK ribbon
	- fixed to use the both sides color printing with YMCKOK ribbon
	- fixed the issue that the panel doesn't find normally after magnetic encoding with YMCKOK ribbon
	- fixed the synchronization the vendor/region code between the Printer and Laminator when the laminator error occurs
	- fixed the issue the input command of Right LED button is delayed when CaseOpen status



[ 1.00.08 ]

	- supported the Erase Tag
	- fixed the issue that balance is decreased by 2 with YMCKOK ribbon when K panel is used on the backside printing
	- fixed the issue that the spool data is sent twice when Spool Error occurs



[ 1.00.07 ]

	- modified the diplay YMC,BYMCKO and YMCKOKR ribbon to the unsupported ribbon
	- fixed the freezing issue when the updating a Firmware through USB connection 
	- fixed the issue that balance is decreased by 2 on the bothsides printing